Showing posts with label windpower. Show all posts
Showing posts with label windpower. Show all posts

Three Bright New Ideas in Biofuels, Solar and Wind Power

>> Thursday, January 21, 2010

The cleantech industry is a constant source of new ideas, for generating energy and for saving it. Many (or most) of these ideas never go anywhere, though. I try to pick out the ones that seem most likely to succeed; the easiest way to do so is look out for new venture capital fundings and pilot projects.


January is proving an especially fertile month, at least for announcements. The three latest companies that look interesting are split across three sectors: FloDesign Wind makes a new type of wind turbine, Joule Biotechnologies is a biofuel startup, andSolar Fusion Power, as you will have guessed, generates solar power with an unusual design.


I’ve split the three up below to give more detail on each; if that’s not enough, the links in each section have even more.



FloDesign Wind
FloDesign hasn’t been in hiding; the company previously won a technology competition at theMassachusetts Institute of Technology for its alternate wind turbine design, which departs from the traditional “prop” design of a wind turbine with something that looks a lot more like a jet engine.



The short explanation of how it works is that air going through the turbine’s rotor and over its cowl joins to cause a “pulling” effect on the air behind it, spinning the blades more quickly than they would otherwise move. The resulting design is a bit odd-looking, as you can see at right, but the basic idea is well proven. Pop over to Youtube to watch FloDesign’s video on their technology.



But there are quite a few variations on the prop design, most of which turn out to be less practical based on factors like the amount of material or wind speed required for their use. How to pick through the pile? Unless you’re an expert in gas flow dynamics, it’s difficult to make objective measurements.



That’s a long-winded way of saying that FloDesign should get some attention, because some folks with fairly good judgment are busy throwing money its way. FloDesign won a $8.3 million grant from the the Department of Energy’s ARPA-E program, and more recently, announced a $34.5 million investment from Kleiner Perkins Caufield & Byers, a Silicon Valley venture firm with a sterling reputation.



Joule Biotechnologies
This one won’t sound too odd at first. Joule plans on putting a microorganism in a pool with nutrients, focusing sunlight on it, and harvesting the resulting oil to use as fuel. Not much different from a greenhouse or plant solarium, right?



It is odd, though, in part because the microorganism isn’t one provided by nature; Joule says it’s a designer product. The sunlight it’s receiving is also more than the usual dosage, having been concentrated by the enclosing panels in each modular unit. Want more fuel? Just add more units.



Algal biofuel producers haven’t had much luck with enclosed systems; they tend to be too expensive. But if Joule can up the output of the system by concentrating sunlight, it might prove efficient enough to survive. It’s planning to build a pilot plant in Texas that will start operating within a few months.



Solar Fusion Power
It has nothing to do with actual fusion, but at least the name is catchy. Solar Fusion Power is a variation, several steps removed, on the now-familiar concept of solar thermal energy, which focuses sunlight with mirrors onto enclosed water, which boils and drives a generator.



One of the advantages of solar thermal, beyond its low cost per watt of energy produced, is the simplicity of most systems. That could be the point on which Solar Fusion falls short. The company’s design centers around a “flower” with mirrored petals. The petals bounce sunlight up onto a central lens. This is not small, delicate machine, by the way; a single unit would cover 50 square meters.



After this double-bounce, the sunlight enters an enclosed chamber full of (extremely hot) liquid calcium. The light raises the temperature enough that the calcium can fuse with a stream of hydrogen, which produces energy. Later, the calcium will let go of the hydrogen molecule, producing more energy and allowing the reaction to be repeated. The result: 50 percent of the initial sunlight’s energy is captured, more than just about any solar system can use.



Still, to my ear, this all sounds a bit too convoluted to work well, or cheaply. But an Australian company called EMC Solar has invested, and the company plans to run a pilot project in Perth, so it’s worth keeping an eye on.


Source : http://bit.ly/8EgFLD

Read more...

AWEA Wind Power Supply Chain Workshop

>> Friday, December 25, 2009

March 17, 2010
The Sheraton Greensboro Hotel at Four Seasons
Greensboro, North Carolina


With the growing demand for wind energy in the U.S., AWEA is bringing its successful supply chain program to the Southeast! Discover how increasing domestic manufacturing of wind turbines and their components can grow your company, staff and profits. This workshop will provide attendees with a unique opportunity to interact with representatives from a diverse range of industries and hear first hand the wind energy industry’s needs, challenges, and opportunities for growth. Don’t miss this opportunity to share resources and best practices with your peers, industry leaders and experts.


Topics:

  • An overview of the wind industry supply chain
  • How to enter the wind industry – tips, tools and resources
  • Hear from some of the major wind turbine manufacturers in the world


New to the wind industry?
Attend our pre-conference seminar on March 16th and learn everything that you need to get up to speed including; an overview and status of the wind industry, anatomy of a turbine, and how the wind energy industry supply chain works.


Registration : http://www.awea.org/events/supplychain4/

Read more...

WINDPOWER® 2010 Conference & Exhibition

>> Tuesday, December 1, 2009

May 23rd - 26th, 2010, at the Dallas Convention Center, Dallas, Texas.



Why Attend WINDPOWER 2010 Conference & Exhibition?

The aggressive growth and future needs of the wind industry has opened new and exciting opportunities for new players to enter the wind market, helping expand wind's growth and strengthen the world economy.


This expansion will require bold, forward-looking action from wind leaders who recognize that addressing America's economic, energy, and climate challenges must be a top priority in the coming years. These leaders will all be at the WINDPOWER 2010 Conference & Exhibition, the largest annual wind conference and exhibition in the world, last year featuring over 23,000 attendees and 1,280 exhibitors.



Conference Schedule

Additional information will be added to this schedule as we get closer to the conference. The conference schedule is returning to its normal pattern this year with pre-conference seminars, the exhibition opening, and the concert on Sunday followed by the main conference sessions and exhibition time on Monday, Tuesday & Wednesday.

Sunday, May 23:
Registration Open
Final exhibitor move-in
Pre-Conference Seminars (8:30 am - 3:00 pm)
Exhibition Open (3:00 pm - 6:30 pm)
First-Time Attendee Orientation Session (3:15 pm - 3:45 pm)
Opening Reception in Exhibit Hall (5:00 pm - 6:30 pm)

WINDPOWER Concert

Monday, May 24:
Registration Open
Welcome & Opening Session (8:30 am - 10:00 am)

Exhibition Open (10:00 am - 6:00 pm)
Concurrent Conference Sessions (10:30 am - 5:00 pm)
Poster Reception (5:00 pm - 6:00 pm)
Exhibit Hall Happy Hour (5:00 pm - 6:00 pm)

Tuesday, May 25:
Registration Open
General Session (8:30 am - 10:00 am)

Exhibition Open (10:00 am - 6:00 pm)
Concurrent Conference Sessions (10:30 am - 5:00 pm)

Conference Dinner

Wednesday, May 26:
Second Annual Scholarship 5K Race

Registration Open
Concurrent Conference Sessions (8:30 am - 5:00 pm)
Exhibition Open (10:00 am - 4:00 pm)
Session Closing Cocktail (5:00 pm - 6:00 pm)



Registration : http://2010.windpowerexpo.org/index.cfm

Read more...

AWEA Wind and Transmission Workshop

March 2 - 3, 2010
Denver, CO


Adequate transmission is necessary to the expansion of wind energy. Learn about the opportunities, potential solutions and challenges the wind industry is facing as we work to overcome the transmission barrier. This workshop will explore ways wind and transmission companies can make more use of existing transmission capacity, work through the logjams in interconnection queues, and expand transmission capacity. It will also examine the roles that the U.S. Congress, FERC and the Department of Energy can play in getting new transmission planned, funded and permitted.


Topics:

  • How and when planned transmission becomes actual transmission
  • Major transmission lines currently planned for the Western, Texas, and Eastern regions
  • Grid operations and integration: ways to enhance the flexibility of the grid, including demand response, new generation, smart grid, energy storage – separating the facts from the hype
  • Opportunities to make the grid more efficient and get more wind on the system
  • Discussion of the Department Of Energy funded interconnection-wide transmission planning process
  • Key challenges and opportunities for wind integration including: legal, regulatory, and technical issues


Read more...

AWEA Wind Power Project Siting Workshop

February 17 – 18, 2010
Westin Tabor Center
Denver, CO



With the 2008 record capacity addition of over 8500 megawatts of wind energy in the U.S., proper siting of wind projects is essential to helping wind energy maintain its “good neighbor” reputation. This workshop’s program will address how wind project siting and elements of the human and natural environment interconnect – including aesthetics, stakeholder dynamics and wildlife interactions. Take advantage of this great opportunity to network with other wind energy siting professionals and to learn the latest on important and relevant siting topics.



Topics:

  • Visual impacts and stakeholder relations
  • Regional permitting structure for wind projects
  • Regional transmission initiatives
  • Sage Grouse and prairie chicken
  • Site construction

Read more...

Wind Power Finance and Investment Summit

>> Thursday, November 26, 2009

Location: San Diego, California, United States Map
Start Date: February 10, 2010
End Date: February 12, 2010

Description:

Join the wind industry’s leading project developers, lenders, investors, financial innovators and other industry players at the 9th annual Wind Power Finance & Investment Summit as they discuss the cutting edge developments in the wind power finance and investment markets, as well as the various challenges and prospects for 2010 and beyond.

This event, which has sold out for the last four years, is well known for attracting the top executives and dealmakers throughout the industry and has become the best deal-making and networking event of the year.

This year’s event will also feature the pre-Summit workshop, Structuring Your Wind Project Financing. This technical workshop is designed to provide you with the best and latest insights into wind power assets valuation, identifying potential hurdles to the deal and structuring the deal and financing to complete the transaction.


Rancho Bernardo Inn
San Diego, California
United States

Contact: Information Forecast Inc.
Tel: (818) 888-4444
Fax: (818) 888-4440
Email: mail@infocastinc.com
Web: http://www.infocastinc.com/index.php/conference/136


Region: North America
Sector: Renewable - Solar, Wind, Water, Etc.
Type: Conferences & Workshops

Read more...

IEEE PES Transmission and Distribution Conference & Expo

>> Wednesday, November 25, 2009

April 19-22, 2010
New Orleans, LA



Deadlines
Register before March 19, 2010 to receive a discounted rate.
If you'd like your badge mailed to you in advance you must register by April 5, 2010.

It’s your new reality. Electric utilities and their associated industries are more connected and the pace of engineering, operations and management is faster than ever before. In order to survive and prosper in a changing marketplace, innovative power and utility professionals know they must have new solutions to the complex problems that they will be confronted with in the future.

The 2010 IEEE PES Transmission and Distribution Conference and Exposition features an extensive program with information you can take back and apply to your job.

Read more...

North American Offshore Wind Conference & Exhibition

>> Sunday, November 15, 2009

Atlantic City, NJ
October 5-7, 2010


Why Attend the AWEA North American Offshore Wind 2010 Conference & Exhibition?

The coastal waters and Great Lakes of North America hold tremendous potential for offshore wind development. Offshore wind projects are well established in Europe, with nearly 20 years of industry experience, and stakeholders are readying for the industry to make the jump across the Pond. AWEA has teamed up with CanWEA to bring you a conference and exhibition that will help drive this industry forward.

The AWEA North American Offshore Wind Conference & Exhibition brings together exhibitors and attendees from all over world, who are interested in becoming players in this new and highly promising market. Don’t miss the boat...see you in Atlantic City!


Read more...